Single-ply membrane · Riverview, FL
TPO Roofing in Riverview, FL
TPO roofing, short for thermoplastic polyolefin, is a white single-ply membrane rolled out over a flat or low-slope deck, with its seams heat-welded into one continuous sheet. In Riverview, Element Roofing Solutions installs and fixes TPO on the low parts of houses and on small shops, repairs it on apartment buildings, and the licensed owner looks over and quotes every one himself.
License
CCC1336059
Google rating
5.0 (21)
Workmanship
5-yr warranty
Pick the flat / low-slope option in the estimator. Tell us if the building is a home, an apartment building or a shop.
Where it fits
Where does a TPO roof make sense around Riverview?
TPO makes sense on any roof section that is too flat for shingles or tile to shed water. On Riverview homes that usually means a porch cover, a room addition or a carport; on small commercial buildings it can be the whole roof behind the parapet.
- Wide, nearly level runs: a single sheet with welded seams has far fewer joints for slow-moving water to find than overlapping pieces of rolled roofing.
- Bright Florida sun: the white surface reflects much of the sunlight that would otherwise bake a dark roof, which is one reason the material is popular on low-slope buildings in hot climates.
- Apartments and small shops: long low-slope roofs on multi-unit buildings and storefronts are where TPO is most common, and Element’s commercial work means repairs on the first and full jobs on the second.
- Attached home sections: a membrane can cover the low part of a house while the pitched roof stays shingled, as long as the joint between them is flashed properly.
- Not for every slope: if the section has enough pitch for shingles, the owner may suggest matching the main roof instead, and he will explain the trade-off.
TPO roofing with Element, in brief
Material
White single-ply TPO
Seams
Heat-welded
Used on
Low-slope homes, small commercial
Repair reach
About 30 min of Riverview
Not taken on
Big-box roofs
How it is built
How is a TPO membrane installed on a low-slope roof?
TPO roofing installation starts with a sound, dry deck. Any soft or water-stained wood is cut out first, because a membrane is only as flat and solid as the surface it is fastened to, and a dip left in the deck becomes a puddle on the new roof.
The sheets are then laid out across the roof, fastened or adhered to the substrate, and overlapped at each seam. A hot-air welder fuses the overlap so the two sheets become one piece. Walls, curbs, drains and the roof edge get their own membrane flashing, and those details take more of the day than the open field does.
- Welded laps: a good weld fuses two sheets into one, while a cold or narrow weld is usually the first place an aging membrane opens.
- Flashed penetrations: pipes, vents and skylight curbs are wrapped with membrane pieces welded to the main sheet.
- Finished edges: metal edge and termination details hold the membrane down at the perimeter, where wind pulls hardest.

Fixing what is there
Can an existing TPO roof be repaired rather than replaced?
Often, yes. A TPO roof that is basically sound can be repaired where a seam has opened, a puncture has gone through or a flashing detail has pulled loose. The owner checks how much of the membrane is still well bonded before recommending a repair, and he will tell you when patching would only delay a new low-slope roof.
Open seams
A lap that has lifted is cleaned and re-welded or covered with a welded patch, depending on how the original seam was made.
Punctures and tears
Dropped tools, fallen branches and foot traffic leave holes that are patched with new membrane welded around the damage.
Flashing at walls and curbs
Membrane flashing that has shrunk or pulled away at a wall or curb is rebuilt so water cannot run behind it.
Wet insulation or decking
Where rain has reached the insulation or plywood, that area is opened and replaced before new membrane goes back over it.
Choosing a low-slope system
How does TPO compare with other options for a flat section?
For a home, the choice is usually between a membrane like TPO and other low-slope systems, and which one wins comes down to the section’s size, how much it is walked on and what it connects to. A small porch roof tucked under the main eave has different needs from a long, open roof over an apartment building.
What matters more than the product name is the detailing at the edges and walls, and the condition of the deck underneath. Where the system allows it, peel-and-stick goes under the membrane, and every inspection starts with the plywood rather than the top layer.
Whether the job is a membrane section on a house or a full low-slope roof on a small building, the same licensed owner handles it, and he will say plainly when a building is outside what Element takes on. Other local roof work is listed under Riverview roofing services.
Your first visit
What does the owner check on a low-slope membrane roof?
The goal of the visit is to find out whether the membrane, the seams or the deck is the real problem.
Joe rings you near 8:30 a.m., one day after your request, and most TPO visits land two or three days later. Nothing gets decided until you have looked at his photos.
- 1
Read the stains
Marks inside and dried water lines on the roof show where water has been collecting.
- 2
Probe the seams
Welded laps are checked along their length for spots that have lifted or never fused.
- 3
Feel the deck
Soft areas underfoot are marked, because wet wood decides whether a repair can hold.
- 4
Check the details
Walls, curbs, drains and edges are photographed, since most membrane leaks start there.
- 5
Price it in writing
You get a repair or replacement number, with the reasoning for each option.
Reviews
Why do customers trust Element with their roofs?
★★★★★ “The team did a great job, so happy with our roof :)”
★★★★★ “Had a great experience with Element Roofing Solutions. The whole team was easy to work with, communicated well, and did exactly what they said they would do. The work was completed on time, the crew was professional, and they left everything clean when they finished. It’s hard to find contractors you can trust these days, but Element Roofing Solutions made the process simple and stress free. I would definitely recommend them to anyone needing roofing work done.”
Every TPO job is run by Joe Singer, the license holder on Florida roofing license CCC1336059; he counts around 100 roofs across seven years of work. On Google, 21 reviews put Element at 5.0.
Customers describe the same habits whether the roof is pitched or flat: clear communication, work finished when promised and a clean site afterward. Both quotes above are copied straight from Google without edits.
Photo file
Are there photos of low-slope work in Element’s files?
A finished TPO roof is not in Element’s photo library yet. The shot below shows self-adhering membrane lapped over a roof edge, the kind of edge detail any low-slope system depends on.

Common follow-ups
What do people ask once they know TPO is an option?
Leak first
My low roof is leaking now. Where do I start?
Start with a visit to find the source. If it turns out to be a seam or a flashing, the job is a repair, tracked down like any roof leak in Riverview.
Other low-slope systems
Is TPO the only flat roof option?
No. The broader picture, including porch and addition roofs, is covered under flat and low-slope roofing, and the owner explains which system fits your section.
Building owners
Do you work on rental buildings?
Yes, rental apartment blocks and small shop buildings suit Element well, and work gets timed around tenants and customers.
Making it last
How do I keep a membrane roof in good shape?
TPO roofing maintenance is mostly housekeeping: keep drains and edges clear of leaves, limit foot traffic to the paths that need it and have the seams looked at after a major storm.
What sets the price
What affects the cost of a TPO roof in Riverview?
A TPO job is priced from the roof itself, so the written number comes after the owner has measured the section and checked the deck. These are the things that move the price most:
- Size and shape: the square footage matters, but so does how many corners, walls and changes in direction the membrane has to follow.
- Deck condition: soaked or spongy plywood under the old surface must come out before any TPO goes down.
- Old layers: every existing layer that has to be torn off adds labor and disposal.
- Penetrations and curbs: each pipe, vent, drain and skylight curb needs its own flashing detail.
- Access: roofs that are hard to reach or need material hand-loaded take longer to supply.
Element keeps no TPO price sheet, so a number given over the phone is only a ballpark. The real figure is written up once Joe has been on the roof, and it moves only for hidden rot or a condition nobody could see, and only with your OK.
For a ballpark on a whole low-slope roof before the visit, Element’s estimator gives a range for flat and low-slope work. Repairs that do not need a full new membrane are covered under flat roof repair around Riverview.
TPO answers
TPO roofing questions we hear around Riverview
Quick, direct answers about TPO on homes and small commercial buildings.
What is a TPO roof?
TPO is a single-ply roofing membrane, usually white, that is laid over a flat or low-slope deck with its seams heat-welded into one continuous sheet.
What does TPO stand for in roofing?
TPO stands for thermoplastic polyolefin, a plastic and rubber blend made into rolls. Being thermoplastic, its overlaps soften under a hot-air welder and fuse together as they cool, so the seams need no glue.
What lifespan can I expect from a TPO roof?
Published estimates usually fall around 15 to 25 years. The real number depends on weld quality, how well the section drains and years of Florida sun, and Joe gives you a plain read on remaining life when he walks your roof.
How is TPO different from EPDM rubber roofing?
TPO is usually white with heat-welded seams, while EPDM is a black rubber sheet whose seams are glued or taped. The white surface reflects more sun, and which one suits a roof comes down to its size, drainage and what is already there.
Can TPO go on a house?
Yes, residential TPO roofing goes wherever a home has a section too shallow for shingles, such as porch covers, additions and carports. The pitched part of the roof normally stays shingled.
Do you install TPO on commercial buildings?
On small retail buildings and the occasional condo roof, yes. Apartment buildings get TPO repairs and not new installs, and big-box stores are outside what Element does.
Can a leaking TPO seam be repaired?
Usually. An opened lap can be cleaned and re-welded or covered with a welded patch, as long as the surrounding membrane and the deck under it are still sound.
Does a white TPO roof stay cooler?
A white membrane reflects much of the sunlight that a dark surface absorbs, so the roof surface runs cooler in direct sun. How much that changes inside depends on the building.
Is rotted decking replaced before the membrane goes on?
Yes. Rotten plywood is swapped out before the TPO goes down, and anything beyond the quoted amount waits for your approval of the photos.
What warranty comes with TPO work from Element?
Each TPO install comes with five years of workmanship coverage from Element; storm hits and factory flaws in the sheet are excluded.
Google reviews, newest first
Read Element’s latest Google reviews
Joe and his team dis an amazing and fast job to fix the leak on my roof. I got three estimates, one was several hundred dollars higher and would not have been able to match the shingles, one was a no show. Joe and team were here the day after I selected them. They were also able to match the shingles perfectly. 100% recommend Element Roofing Soultions!!!
Brandon and team were exceptional. We live in Volusia County and they came out the same day we contacted them and they fixed our roof the same day as well! They were prompt, professional, and did a great job. We would highly recommend this company.
Element Roofing and Brandon Worall’s team were amazing, fast, efficient and extremely clean, professional and reasonably priced. The BEST in Deland. Would highly recommend!!!
Great job easy to communicate with, great cleanup showed up on time, very professional... Best roofers in deland
The team did a great job, so happy with our roof :)
Had a great experience with Element Roofing Solutions. The whole team was easy to work with, communicated well, and did exactly what they said they would do. The work was completed on time, the crew was professional, and they left everything clean when they finished.
It’s hard to find contractors you can trust these days, but Element Roofing Solutions made the process simple and stress free. I would definitely recommend them to anyone needing roofing work done.
If you’re looking for a roofing company that is honest, responsive, and actually does what they say they’re going to do, I can’t recommend Joe and his team enough. From start to finish, the communication was excellent, and they made the entire process feel so much less stressful than I expected.
Joe took the time to answer questions, explain everything clearly, and never made us feel pressured. The crew was professional, showed up when they said they would, and the finished roof looks fantastic.
It’s rare these days to find a company that genuinely cares about its customers, but that’s exactly the experience we had. If I ever need roofing work again, they will be my first call.
Great roofing company. Joe and Victoria were super helpful and kept me informed throughout the whole process. They stayed on a solid timeline and did an awesome job on my roof.
Great experience with this roofing company. They were super helpful from start to finish and stayed on a solid timeline, finishing everything on schedule. They did an awesome job on my roof. Victoria really stood out, she was always on top of things, quick to respond, and made sure I was taken care of. Definitely recommend!
I had an excellent experience with this roofing company. From the beginning, they were incredibly helpful, professional, and made the whole process feel easy and stress free. I especially want to recognize Victoria, she went above and beyond with her customer service. She was attentive, always responsive, and made sure I understood every step along the way. It’s rare to find that level of care and communication. Highly recommend 10/10
These guys are AMAZING! 5***** plus!
Left a 5-star rating without a written comment.
Get the low-slope roof on your home or building looked at properly
One licensed owner inspects, explains and prices the work, with photos of every seam and edge he checked.
